Conversion Ancillary Adapters / Re-locator Brackets

Conversion Ancillary Adapters / Re-locator Brackets

This fitting is for you if you are doing a K-Swap into an older generation Honda chassis. To make sure that your cluster still keeps you informed of the temperature of your engine you need to retrofit your D-Series or B-Series coolant temp sensor into your K-Swaps coolant stream.....

£12.00 Delivery - POA

Clean up your engine bay and eliminate unwanted weight with the Hybrid Racing Heater Core Delete Kit. This kit allows you to delete the heater hoses running from the engine block and cylinder head to the heater core behind your dashboard.....

£26.00 Delivery - POA

The Hybrid Racing Radiator Hose Insert is designed to be used to insert both the fan switch and temperature sensor into the cooling system on a K swapped vehicle. The hose insert is threaded so that both OEM sensors from your stock engine can be installed onto your K series engine. Without the Insert you would need to drill and tap your engine or radiator for installation.This allows your cluster temperature gauge and fan to function properly.....

£37.00 Delivery - POA

The adapter kit includes all mounting hardware required to attach the adapter to the intake manifold and the throttle body to the adapter. Two rubber plugs are included to fill the unused MAP sensor port, located on the RBC/RRB/RBB intake manifold, and the EVAP Purge Control Valve port, if needed to gain additional hood clearance......

£52.00 Delivery - POA

Bracket designed to relocate an H Series Alternator. Ideal for all H Series swaps and H2B conversions. Lowers the factory H22 Altenator to where the AC compressor was originally mounted.....

£94.00 Delivery - POA

Designed for B Series engines with a hydraulic transmission. The actuator will convert from cable to a hydraulic transmission. 100% bolt in, no modifications required.....

£130.00 Delivery - POA

Innovative Mounts Alternator Relocation Bracket to aid fitment of the J Series engine swaps in an eg/dc2 chassis.....

£141.00 Delivery - POA

96-00 EK Civic H22 AC Bracket. This bracket allows the use of all the original air conditioning system components with an H Series motor.....

£141.00 Delivery - POA

88-91 Civic/CRX AC Bracket. This bracket allows the use of all the original air conditioning.....

£141.00 Delivery - POA

If you're looking to gain some power by removing your car's AC and power steering, but don't want to lose the reliability and convenience of the factory belt tensioner, this is the kit for you. Much cleaner looks than the oem setup and even greater hood clearance!.....

£239.00 Delivery - POA