Deatschwerks 450cc Fuel Injectors Civic/Integra/Accord 02-10 K Series K20/K24 / CRZ ZF1 / S2000 F22 06-09

Deatschwerks 450cc Fuel Injectors Civic/Integra/Accord 02-10 K Series K20/K24 / CRZ ZF1 / S2000 F22 06-09
Compatible Vehicles
Accord
CR-V 02-06
Integra 01-06
S2000 04-09
Accord 03+ Saloon / Tourer
Accord 08+ Saloon / Tourer
Civic 02-06 inc Type R
Civic
Civic 07-10 H/B
Civic 07-09 4dr Saloon
CR-V
CR-Z
Integra
S2000
0

Deatschwerks take a unique approach to building our high flow injectors. Other fuel injection companies offer only a couple different styles of injectors and leave fitting them up to the customer. At Deatschwerks every injector they produce is a drop-in fitment for its application. Their injectors are engineered to fit your OEM harness, OEM fuel rail and OEM manifold (see diagram below).

Deatsch Werks Injectors Diagram

All Deatschwerks  high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Deatschwerks back all of their products with a comprehensive 12-month warranty.

INJ-SUZ-410-4 3Most aftermarket injectors go straight from the production line to the shipping department. At Deatschwerks, they have added what they consider a crucial step of flow balancing and quality assurance testing on EVERY set of injectors they produce - not just one or two from each lot. Over 40 data points are collected and analyzed on each injector to be sure customers only receive the best end product. All testing is performed in-house on a custom built New Age Technologies injector flow bench.

Below is a brief outline of some of the testing:

  • 6-point coil test
  • Leak testing from 0-100psi
  • RPM Ramp 500-10,000 rpm
  • Pulse Width Ramp 0.5-17ms
  • Spray pattern analysis (open and pulsed)

Detailed High Performance Flow Report

Every set of Deatschwerks injectors is accompanied by a full color injector report This comprehensive report contains information on your specific injectors that is critical to the high performance tuner such as...

  • Fuel pressure flow rate conversions
  • cc/min and lbs/hr conversions
  • BSFC based horsepower maximims
  • System balance and flow variance

All DeatschWerks injectors feature the following:

  • E85 compatibility
  • Flow rates and set balancing in-house by DeatschWerks
  • Flow balanced to within 1-2% (flow report included)
  • Excellent spray pattern and atomization for optimized idle and tuning
  • 3-year comprehensive warranty
Fuel Pressure Range 40-100 psi
Minimum Pulse Width 1.2 ms
Maximum Duty Cycle 92%
Coil Impedance 12.9 ohm
Injector Type

Denso Top Feed

Connector Type us-car

PSI >

43 58 70 80 90 100
cc/min 442 504 565 616 643 678
lb/hr 42.1 48.0 53.8 58.7 61.2 64.6

Please note: Flow rates listed are the nominal (normal minimum) rates for this injector part number. All sets are flow balanced. For actual flow rates of your set, please refer to the flow report that will accompany your order.

SKU: 21U-01-0450-4
£301.00 Delivery - POA