Deatschwerks take a unique approach to building our high flow injectors. Other fuel injection companies offer only a couple different styles of injectors and leave fitting them up to the customer. At Deatschwerks every injector they produce is a drop-in fitment for its application. Their injectors are engineered to fit your OEM harness, OEM fuel rail and OEM manifold (see diagram below).
All Deatschwerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Deatschwerks back all of their products with a comprehensive 12-month warranty.
Most aftermarket injectors go straight from the production line to the shipping department. At Deatschwerks, they have added what they consider a crucial step of flow balancing and quality assurance testing on EVERY set of injectors they produce - not just one or two from each lot. Over 40 data points are collected and analyzed on each injector to be sure customers only receive the best end product. All testing is performed in-house on a custom built New Age Technologies injector flow bench.
Below is a brief outline of some of the testing:
6-point coil test
Leak testing from 0-100psi
RPM Ramp 500-10,000 rpm
Pulse Width Ramp 0.5-17ms
Spray pattern analysis (open and pulsed)
Detailed High Performance Flow Report
Every set of Deatschwerks injectors is accompanied by a full color injector report This comprehensive report contains information on your specific injectors that is critical to the high performance tuner such as...
Fuel pressure flow rate conversions
cc/min and lbs/hr conversions
BSFC based horsepower maximims
System balance and flow variance
All DeatschWerks injectors feature the following:
Flow rates and set balancing in-house by DeatschWerks
Flow balanced to within 1-2% (flow report included)
Excellent spray pattern and atomization for optimized idle and tuning
3-year comprehensive warranty
Fuel Pressure Range
Minimum Pulse Width
Maximum Duty Cycle
Bosch EV14 (compact)
Nominal Static Flow Rate
Please note: Flow rates listed are the nominal (normal minimum) rates for this injector part number. All sets are flow balanced. For actual flow rates of your set, please refer to the flow report that will accompany your order.